IOGear Network Card GBMA211 User Manual

Package Contents  
Warranty Information  
1 Bluetooth® Stereo Audio Transmitter  
1 Mini USB 4 Pin Charging Cable  
1 3.5mm to ¼” Adapter  
This product carries a 1 Year Limited Warranty. For the terms and conditions of  
1-866-946-4327(U.S. only) or (949) 453-8782.  
1 3.5mm Audio Extension Cable  
1 Full Range Power Adapter  
1 European Prong Changer  
1 Quick Start Guide  
1 Warranty / Registration Card  
Important Product Information  
About Us  
FUN  
Product Model _________________  
Serial # _______________________  
IOGEAR offers connectivity solutions that are innovative, fun, and stylish,  
helping people enjoy daily life using our high technology products.  
System Requirements  
GREEN  
IOGEAR is an environmentally conscious company that emphasizes the  
importance of conserving natural resources. The use of our technology  
solutions helps reduce electronic waste.  
• Available 3.5mm or ¼” Audio Jack  
• A2DP supported Bluetooth Stereo Headphone or Speaker  
Quick Start Guide  
Contact  
Bluetoothh®Stereo Auddio Trannssmitter  
HEALTH  
FRONT  
IOGEAR supports healthy and fit lifestyles. By integrating products with  
the latest scientific developments, IOGEARs solutions enhance the life of  
end-users.  
Toll Free 866-9-IOGEAR (USA)  
Phone: 949-453-8782  
23 Hubble  
Irvine, CA 92618 USA  
support@iogear.com  
GBMA211  
PART NO. Q1042  
© 2008 IOGEAR, INC.  
Pairing with GBMA211  
Operation  
Start Here!  
Overview  
1. Hold ON / OFF Button for 7 seconds on your GBMA211 when it is in OFF mode  
to activate the pairing mode. GBMA211s LED will be flashing blue and red  
alternately.  
2. Activate the pairing mode on your Bluetooth Headset / Headphone. (Please  
refer to your Bluetooth Headset / Headphones user manual on how to activate  
pairing mode.)  
3. Wait for the GBMA211s LED to flash blue only to confirm that the two devices  
are connected to each other. Then you should be able to listen to music  
through GBMA211 with your Bluetooth Headset / Headphone. (For example,  
you can test to see if the GBMA211 is paired by plugging the 3.5mm or ¼”  
audio connector to your PCs audio output. Then use any audio software to play  
your music to see you can hear any audio sound from your Bluetooth Headset /  
Headphone.)  
1. Blue / Red LED  
2. ON / OFF Button  
3. 3.5mm Audio Connector  
4. Mini-USB 4 pin Charger Jack  
Function  
ON  
Button  
Hold ON / OFF for 3 second when its OFF  
Hold ON / OFF for 6 second when its ON  
Hold ON / OFF for 7 second when its OFF  
OFF  
Pairing  
LED Definition  
Description  
Connected  
Flash normally  
2. Turn on GBMA211.  
Blue LED  
Waiting to connect  
Power On  
Flash slowly  
3. Turn on your Bluetooth Headset / Headphone and wait for the blue LED to  
flash normally, then the two devices are successfully connected. (If  
GBMA211 cannot reconnect to any device after turning on for 1 minute, it  
will turn off automatically. Then please turn off both devices and move the  
device closer to each other then repeat step 3.)  
Flash 3 times quickly  
Charging  
On  
Connecting GBMA211 with audio source  
Off  
Charging completed  
Low battery  
Red LED  
Note: GBMA211 can only reconnect to the last connected device. If you have  
paired with another device before the one you currently want to use,  
please go to Pairing with GBMA211 to re-pair the device.  
Flash quickly every 5 second  
Flash 3 times quickly  
Charging GBMA2
11  
1. Plug GBMA211 into the 3.5mm or ¼” audio jack of MP3 player or any audio  
source.  
Power Off  
4. Now, you should be able to listen to music from the MP3 player or any audio  
source.  
5. Use the audio sources Volume Up / Down control button to adjust the  
volume.  
Blue LED and Red LED flash  
alternately  
Note: You have to fully charge the batteries for 6 hours before initial usage.  
Blue and Red LED  
Paring Mode  
BACK  
1. Connect the mini USB charging cable to the GBMA211 and any open USB  
port on your PC. You can also charge GBMA211 via AC adapter.  
2. The LED on the GBMA211 will light up in red indicating that it is being  
charged.  
Note: Before initial usage, we recommend that you fully charge GBMA211 for at  
least 2 hours.  
Note: You have to pair GBMA211 and the Bluetooth Headset / Headphone if  
you are trying to connect them for the first time. After the initial pairing  
process, GBMA211 will search and re-connect with the Bluetooth  
Headset / Headphone on standby status. (Please refer to Pairing with  
GBMA211 if you need to pair your Bluetooth device with GBMA211.)  
3. When the charging is completed, the red LED will go off.  
Note: Please connect the cable directly to your PC and avoid connecting it  
through other devices, such as a USB hub.  
 

Impulse Nail Gun IM200 F18 User Manual
Indesit Microwave Oven KP59MSXG User Manual
Insignia Car Stereo System NS CD512 User Manual
Intel Computer Accessories IQ80960RM User Manual
JBL Speaker CS1204B User Manual
John Deere Air Compressor HR1 20E User Manual
JVC Camcorder GR AX1027 User Manual
JVC CD Player KD ABT22 User Manual
JVC Stereo Receiver RX 6510VBK User Manual
Kenmore Air Cleaner 106832 User Manual